Gloversville's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across New York.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Gloversville.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Gloversville, NY experiences the kind of temperature swings that punish conventional roofing and insulation. Lapolla Industries installs spray polyurethane foam systems engineered to perform in exactly these conditions — continuous insulation with no thermal bridging, no seams, and no weak points where New York weather can exploit gaps in your building envelope.
For Gloversville businesses watching their utility bills climb, a spray foam roof restoration can reduce cooling costs by 20 to 40 percent while extending roof life by 20 or more years. For homeowners, attic and crawl space insulation with closed-cell SPF eliminates hot spots, cold drafts, and the energy waste that comes with them. Call (866) 605-0362 for a free energy assessment.
Quality, integrity, and results — the Lapolla Industries difference for Gloversville property owners.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Common questions about spray foam roofing and insulation in Gloversville, NY.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Gloversville. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Gloversville roof with drainage challenges or heavy weather exposure.
A properly installed SPF roof in Gloversville can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam insulation costs in Gloversville typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Gloversville homeowners see a full return on investment through energy savings within 3 to 5 years.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Gloversville crews evaluate the existing substrate to ensure it is structurally sound before application.
Yes. Every Gloversville crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Absolutely. SPF roofing performs exceptionally in both extremes because the closed-cell foam provides continuous insulation without thermal bridging. In hot Gloversville summers, the reflective coating reduces surface temperatures by up to 50 degrees. In winter, the insulation value keeps conditioned air inside.
Real reviews from property owners we have served across the country.
"Got a comprehensive inspection done on our warehouse roof. They found three areas of trapped moisture that were invisible from the surface. The early detection saved us from much more expensive structural repairs down the road."
"Lapolla Industries installed a spray foam roof on our warehouse last spring. Their crew was thorough, professional, and finished ahead of schedule. The building stays cooler in summer and the roof looks pristine a year later."
"Our 18-year-old roof was showing its age but still structurally sound. Lapolla Industries recommended restoration over replacement and it was the right call. New coating, sealed seams, and a 15-year warranty. Smart investment."
We also provide spray foam roofing and insulation services in these neighboring communities.